Server Blade Web Console Function - Hitachi Compute Blade 2000 User Manual

Server blade web console function

This section describes the functions of the server blade web console.
(1) List of user accounts screen
The following table shows functions provided by the server blade web console.
#
Server Operation tab
1 Server Information
2 Power and LEDs
3 EFI Setup
4 LP Setup
5 Server Configuration and
Reduction
Server Settings tab
6 Language Settings
7 Asset Information
8 Network Settings
9 Service Settings *1
10 Security and Service
Settings *2
11 User Accounts
12 BMC Time
13 Remote KVM
14 SSH Server
15 SSL Server
16 DNS Client
17 IPMI Over LAN
18 LDAP
Maintenance tab
19 EFI Firmware
Management
20 BMC Firmware
Management
21 Backup System Settings
22 Restore System Settings
Menu
Shows the server blade information
Controls the power status and reset operation.
Shows the power status and light emitting
diode (LED) status.
Configures the EFI settings.
Configures the LPAR manager boot settings.
Shows the central processing unit (CPU) and
memory configuration and sets the planned
reduction.
Sets the language to use on the server blade
Web console.
Sets the asset information.
Shows the network settings and configures
access restriction settings.
Enables or disables the services of the server
blade and configures the port numbers for the
services.
Enables or disables security and services, and
sets port numbers for the services.
Configures user accounts.
Sets the BMC time and time zone.
Sets the mouse mode of the remote console.
Sets the authentication method of SSH and
shows the fingerprints of the Host Keys.
Sets up
certificate.
Sets the DNS server used by a server blade.
Sets IPMI Over LAN user account. (*3)
Configures Lightweight Directory Access
Protocol (LDAP) user authentication. (*4)
Updates EFI firmware.
Updates BMC firmware and switches firmware
banks.
Backups EFI settings and LPAR manager boot
settings.
Restores EFI settings and LPAR manager boot
90
Function
Secure Socket Layer
(SSL) server