Hitachi Compute Blade 2000 User Manual page 698

Do not restore the management module backup file while the
server blade is in operation. Proper operation may not be
available due to the inconsistency between the restored
configuration and the configuration when the server blade
operates.
When restoring the backup file while the server blade with
N+M cold standby enabled is not in operation, make sure to
perform Smart Configure afterwards.
If you enter B at the UBR command menu and press Enter, the menu for restoring
BMC configuration information is displayed.
(M,B,E,F,V,H,D,[Q]) : B(Enter)
-- BMC menu --
R. Restore.
Q. Quit.
(R,[Q]) :
Select a menu item from the following list to execute the function.
Menu
R. Restore.
Q. Quit
If you enter R at the BMC configuration menu and press Enter, you are prompted to
select a partition. When you enter the partition number and press Enter, the history list
for storing BMC configuration information appears, and you are prompted to select a
datum to be restored. When you enter the number to specify the history, a confirmation
message appears. To restore the configuration, enter Y at the confirmation prompt and
press Enter. To cancel the operation, enter N at the confirmation prompt and press
Enter, or simply press Enter.
(R,[Q]) : R (Enter)
Select partition (0-7,[Q=Quit]) : 0
-- Backup file list --
No. Time
--- -------------------
0 2009-03-10 15:58:30
1 2009-03-11 19:49:39
2 2009-03-13 15:21:04
3 2009-03-13 17:03:26
4 2009-03-13 17:41:15
Select backup data (0-4,[Q=Quit]) : 0
Confirm? (Y,[N]) : Y
- <Partition0> Restoring backup data was completed.
Hit enter key. (Enter)
Restores BMC configuration information.
Returns to the previous menu.
(Enter)
(Enter)
(Enter)
647
Description