Hitachi Compute Blade 2000 User Manual page 628

MIB setting information is described in the table below.
Item Description of item
Version MIB file version
If you enter A in the SNMP command menu and press Enter, you can set the SNMP
agent setting. Required setting items are different depending on SNMP versions.
When you enter the required information, a message to confirm the SNMP agent
setting appears. At the prompt, enter Y and press Enter, and the SNMP agent setting
is saved. To cancel the setting, enter N and press Enter, or just press Enter.
(A,M,DA,DM,T,C,[Q]) : A
Agent : Disable
(0=Disable,1=Enable,[Unchange]) : 1
Contact name :
([Unchange]) : Administrator
Location :
([Unchange]) : A3F
Port number : 161
(1-65535,[Unchange]) : 8161
Trap level : All
(0=All,1=Alert,2=Information,3=Disable,[Unchange]) : 2
SNMP version : v1/v2c
(0=v1/v2c,1= v1/v2c/v3,[Unchange]) : 1
Engine ID string : zzzzzzzzzzzz
([Unchange]) : xxxxxxxxxxxxxx
-- SNMP agent setting --
Agent : Enable
Contact name : Administrator
Location : A3F
Port number : 8161
Trap level : Information
SNMP version : v1/v2c/v3
Engine ID string : xxxxxxxxxxxxxx
Engine ID : yyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyy
Confirm? (Y,[N]) : Y
- Writing setting was completed.
Hit enter key.
Value
Character
string in -
ASCII
577
Description of value