Hitachi Compute Blade 2000 User Manual page 956

Description of
Item
World WWNN
wide node
name
 PSM command
You can set a power supply module and display the status. Type PSM at the prompt,
and press Enter.
5713RF0 NNNNN(0)IOEU> PSM
<< PSM - Power supply module. >>
-- Power supply module status --
PS Power
-- -------------------- --------- --------
0 On
1 On
-- AC input voltage setting --
Voltage : 200
-- Power supply module menu --
Q. Quit.
([Q]) :
Select a menu item from the following list to execute it.
Menu
Q. Quit
Items of the power supply module status are described in the table below.
Description of
Item
PS Power supply slot
number
Power Power status
item
-------
XX:XX:XX:XX:XX:XX:XX:XX
*XX:XX:XX:XX:XX:XX:XX:XX
(Enter)
Condition AC input
Normal Normal
Normal Normal
Quits the PSM command.
item
0 to 1
-------
On
Off
905
Value
Description of value
Not installed; No applicable
port; I/O adapter without
WWN installed; Not
collected information on the
I/O adapter.
Default Physical WWN
(WWNN)
Displayed Default Physical
WWN (WWPN) may be
different from Default
Physical WWN (WWPN) of
the I/O adapter.
Description
Value
Description of value
-
No power supply module is
installed.
The power is on.
The power is off.