Hitachi Compute Blade 2000 User Manual page 631

If you enter T in the SNMP command menu and press Enter, an SNMP trap for test is
sent. Enter Y in the message to confirm the test transmission and press Enter, and the
SNMP trap for test is transmitted. To cancel the test, enter N and press Enter, or just
press Enter.
(A,M,T,C,[Q]) : T (Enter)
Confirm? (Y,[N]) : Y (Enter)
- Sending SNMP trap was completed.
Hit enter key. (Enter)
If you enter C in the SNMP command menu and press Enter, a copy of the MIB file is
mirrored into the user directory. Enter Y in the message to confirm the copy execution,
and press Enter to copy it. To cancel the copy process, enter N and press Enter, or
just press Enter.
(A,M,T,C,[Q]) : C (Enter)
Confirm? (Y,[N]) : Y (Enter)
- Copying MIB file was completed.
Hit enter key. (Enter)
Enter H in the SNMP command menu and press Enter to set a trap message. When
you select BSM or HCSM on which the trap message is based on, Confirm? is shown.
Enter Y and press Enter to set the trap message. To cancel the setting, enter N and
press Enter, or just press Enter.
Trap message : BSM
(0=BSM,1=HCSM,[Unchange]) : 1
Confirm? (Y,[N]) : Y
- Changing trap message was completed.
Hit enter key.
580