Hitachi Compute Blade 2000 User Manual page 442

Click Next.
3
The following screen appears:
4 Click Next once more.
The following screen appears:
5 Select one of the setting values in the table below from Controller BIOS, and
then click Submit.
Setting value
Enabled
Disabled
Make sure to click Submit after changing the setting.
Description
Enables BIOS of the SAS RAID controller:
MegaRAID SAS 2208.
Enables the boot from the disk array.
Disables BIOS of the SAS RAID controller:
MegaRAID SAS 2208.
Disables the boot from the disk array.
391