Click Next.
2
The following screen appears:
3
Click Next once more.
The following screen appears:
4
Select one of the setting values in the following table from Controller BIOS,
and click Submit.
Setting value
Enabled
Disabled
Make sure to click Submit after changing the setting.
Description
Enables BIOS of the SAS internal RAID board:
GVX-CA2SRD2X1/GV-CA2SRD2X1-Y.
Enables the boot from the disk array.
Disables BIOS of the SAS internal RAID board:
GVX-CA2SRD2X1/GV-CA2SRD2X1-Y.
Disables the boot from the disk array.
316