Hitachi Compute Blade 2000 User Manual page 691

FATAL: Error status
LID lamp LED status: On: the LID lights solid; Off: The LID does not light.
If you enter P at the SWC command menu and press Enter, the status of the switch
modules is displayed.
(P,L,[Q]) : P (Enter)
-- Switch module status --
SW Type
-- ---------------- ----- ------------- --------
0 1G LANSW
1 1G LANSW
2 1/10G LANSW
3 1/10G LANSW
4 1/10G LANSW
5 1/10G LANSW
-- Power control menu --
P. Power on.
F. Power off.
Q. Quit.
(P,F,[Q]) :
Select a menu item from the following list to execute the function.
Menu
P. Power-on
F. Power-off.
Q. Quit
When you enter P at the switch module power control menu and press Enter, you
are prompted to select a switch module.
(P,F,[Q]) : P (Enter)
Select switch module (0-5,[A=All]) : A (Enter)
Confirm? (Y,[N]) : Y (Enter)
- <Switch module0> Power on was completed.
- <Switch module1> Power on was completed.
- <Switch module2> Power on was completed.
- <Switch module3> Power on was completed.
- <Switch module4> Power on was completed.
- <Switch module5> Power on was completed.
Hit enter key. (Enter)
Power Condition LID lamp
On Normal Off
On Normal Off
On Normal Off
On Normal Off
On Normal Off
On Normal Off
Turns on power to the switch module.
Turns off power to the switch module.
Returns to the previous menu.
640
Description