Hitachi Compute Blade 2000 User Manual page 692

When you enter F at the switch module power control menu and press Enter, you
are prompted to select a switch module.
(P,F,[Q]) : F (Enter)
Select switch module (0-5,[A=All]) : A (Enter)
Confirm? (Y,[N]) : Y (Enter)
- <Switch module0> Power off was completed.
- <Switch module1> Power off was completed.
- <Switch module2> Power off was completed.
- <Switch module3> Power off was completed.
- <Switch module4> Power off was completed.
- <Switch module5> Power off was completed.
Hit enter key. (Enter)
If you enter L at the SWC command menu and press Enter, the status of the switch
modules is displayed.
(P,L,[Q]) : L (Enter)
-- Switch module status --
SW Type Power Condition
-- ---------------- ----- ------------- --------
0 1G LANSW On
1 1G LANSW On
2 1/10G LANSW On
3 1/10G LANSW On
4 1/10G LANSW On
5 1/10G LANSW On
-- LID lamp control menu --
T. Turn on
F. Turn off
Q. Quit.
(T,F,[Q]) :
Select a menu item from the following list to execute the function.
Menu
T. Turn on.
F. Turn off.
Q. Quit
LID lamp
Normal Off
Normal Off
Normal Off
Normal Off
Normal Off
Normal Off
Turns on the switch module LID.
Turns off the switch module LID.
Returns to the previous menu.
641
Description