See the BMC manual for details about setting the memory mode on the server blade
Web console.
On the North Bridge sub-menu, you can check the Memory Init Mode and NUMA
settings, but you must not attempt to change the settings.
Change the Memory Init Mode and NUMA settings, if necessary, only from the
server blade Web console.
The settings on the North Bridge sub-menu can be viewed only. They must not be
changed because if a setting is changed inadvertently, the EFI may not start.
(2) Checking and setting Wake On Lan
To check the Wake On Lan setting, select South Bridge on the Chipset menu to
show the following sub-menu.
Figure 5-41: South Bridge sub-menu
Wake On Lan is always set to Enable.
If the setting appears as Disable, change it to Enable. On the South Bridge sub-
menu, Wake On LAN is the only setting you can change. You must not change the
other settings.
421