Network Management - Hitachi Compute Blade 2000 User Manual

Network management

 LC command
You can display and set the network information with this command. Type LC at
prompt, and press Enter.
5713RF0 NNNNN(0)IOEU> LC
<< LC - LAN configuration. >>
-- I/O module LAN interface setting --
IP address
--------------- --------------- ---------------
192.168. 0. 65 255.255.255.
-- I/O module DNS setting --
D IP address
- ---------------
0 0. 0. 0.
1 0. 0. 0.
2 0. 0. 0.
-- Management LAN setting menu --
E. Edit I/O module setting.
Q. Quit
(E,[Q]) :
Select a menu item from the following list to execute it.
Menu
M. Edit I/O module setting
Q. Quit
If you type E in the LC command menu and press Enter, the current values appear in
numerical order as shown in the following table. At the prompt, press Enter, or enter a
setting value and press Enter, and the screen will go to the next setting.
Menu
1
2
3
4
5
6
(Enter)
Subnetmask Default gateway
0 0.
0
0
0
Edits network setting for the I/O module.
Quits the LC command.
IP address of the I/O module
Subnetmask of the I/O module
Default gateway of the I/O module
IP address of the DNS server 0
IP address of the DNS server 1
IP address of the DNS server 2
929
0. 0. 0
Description
Description