Hitachi Compute Blade 2000 User Manual page 602

Switch module network setting is described in the table below: Network setting
information on a switch module.
Item Description of item
SW Slot number of the switch
module
Ext Option to connect the
management interface for
internal devices of the
switch module to the output
port for external devices.
IP address IP address of the
management interface in
the switch module
Subnetmask Subnetmask to the
management interface in
the switch module
Default Default gateway to the
gateway management interface in
the switch module
Ext port External port connected to
the management interface
in the switch module
Value
0 to 5
-
Int Internal connection only
Connection from the external
output port is not available.
Ext Connection from the external
output port is available.
For 10 Gb DCB SW, internal
connection is simultaneously
available with values Ext for Ext,
Yes for Synchronize, and not
0.0.0.0 for IP address. In this
case, only information on
connection from external output
ports is shown.
IOSW IOSW: input output switch
Ethernet port of the switch
module
For 10 Gb DCB SW, no Ethernet
port of the switch module exists.
When it is specified, neither
internal connection nor
connection from external output
ports is available.
IP address
-
format
IP address Interface to view and update the
format * management interface LAN
setting:
- Not supported by the switch
module.
- Supported by the switch module
but an error has occurred.
------- Internal connection is set.
IP address
-
format
------- Internal connection is set.
IP address
-
format
------- Internal connection is set.
MGMT-0 Management LAN port0
MGMT-1 Management LAN port1
------- Internal connection is set.
551
Description of value