Hitachi Compute Blade 2000 User Manual page 598

If you enter P in the LC command menu and press Enter, the network setting of the
partition is displayed.
(C,M,P,SW,V,[Q]) : P
-- Partition network setting --
P IP address Subnetmask
- --------------- --------------- --------------- --------
0 0. 0. 0. 0 0. 0. 0. 0
1 0. 0. 0. 0 0. 0. 0. 0
2 0. 0. 0. 0 0. 0. 0. 0
3 0. 0. 0. 0 0. 0. 0. 0
4 0. 0. 0. 0 0
5 0. 0. 0. 0 0. 0. 0. 0
6 0. 0. 0. 0 0. 0. 0. 0
7 0. 0. 0. 0 0. 0. 0. 0
-- Partition network setting --
A. Edit all partition setting in one network.
N. Edit one partition setting.
Q. Quit.
(A,N,[Q]) :
Select a menu item from the following list to execute it.
Menu
Edit all partition settings in
A.
one network.
N. Edit one partition setting.
Q. Quit
If you enter A in the partition setting menu and press Enter, the current values
appear in the numerical order listed in the table below. Press Enter, or enter a setting
value and press Enter, and the screen will go to the next setting.
Menu
1
2
3
4
5
6
7
8
9
10
(Enter)
Default gateway Ext port
0. 0. 0. 0
0. 0. 0. 0
0. 0. 0. 0
0. 0. 0. 0
0. 0. 0 0. 0. 0. 0
0. 0. 0. 0
0. 0. 0. 0
0. 0. 0. 0
Edits the network setting of the individual partition.
Returns to the previous menu.
Subnetmask
Default gateway
IP address of the partition 0
IP address of the partition 1
IP address of the partition 2
IP address of the partition 3
IP address of the partition 4
IP address of the partition 5
IP address of the partition 6
IP address of the partition 7
547
------
------
------
------
------
------
------
------
Description
Description