Hitachi Compute Blade 2000 User Manual page 577

Description of
Item
item
If you enter [l] in the Optional Physical MAC menu, press Enter, and select a partition
number to initialize the Optional Physical MAC address.
(S,I,E,H,[Q]) : I
Select partition (0-7,A=All,[Q=Quit]) : 5
Confirm? (Y,[N]) : Y
- <Partition5> Writing setting was completed.
Hit enter key.
If you enter E in the Optional Physical MAC menu, press Enter, and select a partition
number, server blade number, card type, card number only for expansion cards and
I/O boards, and controller number only for expansion cards, the Optional Physical MAC
address can be edited.
(S,I,E,H,[Q]) : E
Select partition (0-7,[Q=Quit]) : 7
Select server blade (7,[Q=Quit]) : 7
Select card (0=Onboard,1=Mezzanine card,2=I/O adapter,[Q=Quit]) :
0
<Port0>
Additional MAC address : 00:00:87:C4:C5:7E
([Unchange]) : 00:00:87:AA:AA:AA
<Port1>
Additional MAC address : 00:00:87:C4:C5:7F
([Unchange]) : 00:00:87:BB:BB:BB
-- Additional MAC address --
P S Card Controller Port MAC address
- - ---- ---------- ---- ------------------
7 7 ONBD 0 0 *00:00:87:AA:AA:AA
7 7 ONBD 0 1 *00:00:87:BB:BB:BB
7 7 MC0 0 0 00:00:87:C4:C5:80
7 7 MC0 0 1 00:00:87:C4:C5:81
・ ・ ・
7 7 IO1 0 6 00:00:87:C4:C5:AE
7 7 IO1 0 7 00:00:87:C4:C5:AF
Confirm? (Y,[N]) : Y
- <Partition7> Writing setting was completed.
Hit enter key.
Value
------------
(CONFLICT)
526
Description of value
Not obtained the Optional Physical
MAC address.
Detected multiple MAC addresses
with the same value. Partition
numbers with a conflict are shown
at the bottom of the list.