Hitachi Compute Blade 2000 User Manual page 515

Select a menu item you require from the following list, and execute it.
Menu
L. Edit local time.
Edit time zone and
Z.
Daylight Saving Time.
Edit synchronization
S.
setting.
N. Edit NTP server setting
R. Restart NTP service.
Q. Quit
Local time information on the management module is described in the table below.
Item Description of item
Date Local date
Time Local time
Time zone and DST (Daylight Saving Time) information on the management module is
described in the table below.
Item Description of item
Time zone -
DST Daylight Saving Time
DST start
When DST starts.
time
DST end
When DST finishes.
time
Details of DST are described in the following list.
Item
Y What number day in the month.
The last day of a week in the month: XXX is 3 characters to show a day of a
lastXXX
week. (ex. Sun, Mon, Tue, etc.)
The first XXX after the Y in the month: XXX is 3 characters to show a day of a
XXX>=Y
week. (ex. Sun, Mon, Tue, etc.)
The last XXX before the Y in the month: XXX is 3 characters to show a day of
XXX<=Y
a week. (ex. Sun, Mon, Tue, etc.)
Description
Sets time of day.
Sets a time zone and Daylight Saving Time.
Sets time synchronization setting.
Sets Network Time Protocol (NTP) server.
Restarts NTP service running at management module.
Quits the Setting Date (SD) command.
Value
YYYY-MM-
YYYY: AD year; MM: month; DD:day
DD
hh:mm:ss hh: hour; mm:minute; ss: second
Value
from –
Time difference from Coordinated
12:00 to
Universal Time (UTC)
+14:00
Enable The daylight saving time setting is
enabled.
Disable The daylight saving time setting is
disabled.
MMM The time to start DST
ZZZZZ
MMM: the first 3 characters of a
hh:mm
month (ex. Apr, Oct)
ZZZZZ: start date
(hh: hour; mm: minute)
MMM The time to finish DST
ZZZZZ
MMM: the first 3 characters of a
hh:mm
month (ex. Apr; April; Oct:
October)
ZZZZZ: end date
(hh: hour; mm: minute)
Description of value
464
Description of value
Description of value