Hitachi Compute Blade 2000 User Manual page 946

Control signal setting status is described in the table below.
Item Description of item
# I/O module slot
number with a PCI
express expander
installed
Control Synchronization
signal setting
 PS command
Status of all modules is displayed. Type PS at the prompt, and press Enter.
5713RF0 NNNNN(0)IOEU> PS
<< PS - Show power and other sensors. >>
-- Sensor menu --
C. Show information of server chassis.
I. Show sensors of I/O module.
PS. Show sensors of power supply module.
F. Show sensors of fan module.
Q. Quit.
(C,I,PS,F,[Q]) :
Select a menu item from the following list to execute it.
Menu
C. Show information of I/O
slot expansion unit
chassis.
I. Show sensors of I/O
module.
Show sensors of power
PS.
supply module.
Show sensors of fan
F.
module.
Q. Quit
If you type C in the PS command menu and press Enter, the chassis information is
displayed. The screen display may be different depending on your configuration.
Value
0.1 -
Disable The setting is Off.
Enable The setting is On.
(Enter)
Description
Displays the chassis information.
Displays sensors of the I/O module.
Displays sensors of the power supply module.
Displays sensors of the fan module.
Quits the PS command.
895
Description of value