Hitachi Compute Blade 2000 User Manual page 596

-- VLAN setting --
Partition
VLAN ID Ext port M 0 1 2 3 4 5 6 7 0 1 2 3 4 5
------- -------- - --------------- -----------
Untag0 MGMT-0 X X - - X X X X X X X X X X X
Untag1 MGMT-1 - - - - - - - - - - - - - - -
1000 MGMT-0 - - X - - - - - - - - - - - -
1001 MGMT-0 - - - X - - - - - - - - - - -
2000 MGMT-0 - - - - - - - - - - - - - - -
Hit enter key. (Enter)
If you enter M in the LC command menu and press Enter, the network setting of the
management module is displayed.
(C,M,P,SW,V,[Q]) : M
-- Management module LAN interface setting --
IP address Subnetmask
--------------- --------------- --------------- --------
192.168. 0. 1 255.255.255. 0
-- Management module DNS setting --
D IP address
- ---------------
0 0. 0. 0. 0
1 0. 0. 0. 0
2 0. 0. 0. 0
-- Management LAN setting menu --
L. Edit management module setting.
Q. Quit.
(L,[Q]) :
Select a menu item from the following list to execute it.
Menu
Edit management module
L.
setting
Q. Quit
If you enter L in the network setting menu of the management module and press
Enter key, the current values appear in the following numerical order shown in the
table below. At the prompt, press Enter, or enter a setting value and press Enter, and
the screen will go to the next setting.
Menu
1
2
3
Switch module
(Enter)
Default gateway Ext port
0. 0. 0. 0
Edits the network setting of the management module.
Returns to the previous menu.
IP address of the management module
Subnetmask of the management module
Default gateway of the management module
545
MGMT-0
Description
Description