Hitachi Compute Blade 2000 User Manual page 657

Type S in the HCSM command menu and press Enter to show the Send alert menu.
(A,M,D,S,[Q]) : S (Enter)
-- Partition status --
P Power Condition
- ------------ -------------- -------- ----- --------------
0 Off Normal
1 On Normal
2 ---------- ------------
3 Off Initializing
4 Powering on Normal
5 Powering off Normal
6 On Normal
7 Off FAIL
-- Send alert menu --
I . N+M immediate.
D . N+M delayed.
Q . Quit.
(I,D,[Q]) : I (Enter)
Select partition (0-7,[Q=Quit]) : 0 (Enter)
WARNING : If confirm, partition0 will be powered off.
Confirm (Y,[N]) : Y (Enter)
- <Partition 0> Send alert was completed.
Hit enter key.
Select a menu you require from the following list, and execute it.
Menu
I. N+M immediate.
D. N+M delayed.
Q. Quit
Type [l] in the menu and press Enter to send an immediate failover. You are prompted
to enter a partition number: the prompt is ready. When you have entered a partition
number, a confirmation message is displayed: the prompt is ready. To send the
immediate failover, type Y and press Enter. To cancel the immediate failover, type N
and press Enter or just press Enter after the confirmation message.
Type D and press Enter to send a delayed failover. You are prompted to enter a
partition number: the prompt is ready. When you have entered a partition number, a
confirmation message is displayed: the prompt is ready. To send the delayed failover,
type Y and press Enter. To cancel the delayed failover, type N and press Enter or just
press Enter after the confirmation message.
LID lamp Mode Auto power on
On Basic Synchronized
Off Basic Synchronized
------ --- ------------
Off --- Synchronized
Off Basic Synchronized
On LP Synchronized
Off Basic Synchronized
Off Basic Synchronized
Description
Sends an immediate failover.
Sends a delayed failover.
Returns to the previous menu.
606