Booting LPAR manager
1
Select Server Operation > Power and LEDs with the server blade Web console,
and click Power on to turn on power to the server blade.
2
Log in to BMC via terminal software to connect to the LPAR manager screen.
When using the LPAR manager screen, connect to the LPAR
manager screen via BMC: connect to the BMC IP address via
Telnet.
If you connect to the LPAR manager screen via the OS
console connected to the management module, some
problems might occur. For example, a screen might change to
another screen when you press an arrow key on the LPAR
manager screen, which is the same behavior when pressing
Esc, and setting values might not display correctly.
1048