Preparation For Lpar Manager Boot - Hitachi Compute Blade 2000 User Manual

Preparation for LPAR manager boot

 Terminal software setting
It is recommended to use the latest version of Tera Term (4.XX or later versions) for LPAR
manager. If any other kind of terminal software is used, PFkey, PageUp, and/or
PageDown might not be available.
If those functions cannot be used with Tera Term earlier versions, change the Tera Term
key setting by following the steps below:
1 Open KEYBOARD in the Tera Term folder: Open a text file and then drag and drop
KEYBOARD on it.
2 Change the Video Terminal (VT) editor keypad setting to those in the following table,
and save it.
Before change
Find=338
Insert=327
Remove=329
Select=339
Prev=335
3 Start Tera Term and execute Setup > Read key map. When some files are
displayed, select KEYBOARD.CNF and then execute Open.
4 Confirm that the PageUp key is available by scrolling pages up and down on the
LPAR Configuration screen.
Initial settings for Tera Term as follows:
Be sure to use a Telnet connection. Proper operation with serial connection is not
guaranteed.
5 Execute Setup > Terminal to change the setting to those in the following table.
Item
Terminal size
Terminal ID
Line feed code
Chinese character
After change
Find=327
Insert=338
Remove=339
Select=335
Prev=329
Setting value
80x50
VT100
CR
UTF-8
1039