Rpf(I)- (1.0-2.5); Removal Of The Air Inlet Grille; Removal Of The Air Filter - Hitachi RCI-1.0FSN3 Service Manual

10 Servicing

10.10 RPF(I)- (1.0-2.5)

10.10.1 Removal of the air inlet grille

RPF-(1.0-2.5)FSN2E
Loosen the screws on the securing plate of the right part of the
grille then remove the plates.
Press the button on both sides of the grille in the direction indicated
by the arrow. The grille can be opened at a 30° angle.
Remove the air inlet grille from the hinges.

10.10.2 Removal of the air filter

RPF-(1.0-2.5)FSN2E
The air filter is located inside the air inlet grille. Remove the air inlet
grilles as indicated in section Removal of the air inlet grille.
Remove the filter by pulling the filter button.
10
389
SMGB0077 rev.0 - 01/2013