Suspension Bracket Installation - Hitachi RCI-1.0FSN3 Service Manual

2 Unit installation

2.4.3 Suspension bracket installation

Cut out the printed pattern on the inside of the unit's cardboard
packaging and follow the instructions printed on it.
The following information is also included on the pattern:
1 Separation of the sling bolt for installation positions (a) and (b).
2 Positions of the holes for the refrigerant pipes.
3 Positions of the holes for the drain pipes.
The suspension bracket can be hung in two positions:
Model
RPC-2.0FSN2E
RPC-(2.5/3.0)FSN2E
RPC-4.0FSN2E
RPC-(5.0/6.0)FSN2E
Select the suspension bracket system in line with installation requirements.
N O T E
Installation position (a) is recommended for a partially hidden installation.
Fit the suspension brackets on the sling bolts or the anchor bolts
and securing using the nuts and washers supplied.
Apply a thread-locking product to the bolts and nuts to prevent
them from loosening. Otherwise, abnormal noise may be caused
by mechanical vibrations and the indoor unit may become loose.
44
SMGB0077 rev.0 - 01/2013
A B
1094 920
1314 1140
1314 1140
1574 1400
C D
1010 150
1230 150
1230 110
1490 110
E F
220 255
220 255
280 235
280 235