Removal Of The Float Switch; Removal Of The Air Filter - Hitachi RCI-1.0FSN3 Service Manual

10 Servicing

10.7.7 Removal of the float switch

Remove all screws -A- from the lower cover of the unit and
separate it.
Remove the drain pan Removal of the drain pan.
N O T E
To disconnect and remove the float switch, previously see the
chapter corresponding to the wiring diagrams in this Manual.
Loosen the resin nut securing the float switch -A- and remove it. If
the switch support is to be removed, remove screws -B-.
N O T E
The torque value of the resin nut is 0.3 - 0.4 Nm. If the torque
value is higher, the nut will be damaged.

10.7.8 Removal of the air filter

Remove the four set screws from the support fixture -1- of the air
filter -2- and separate both parts.
357
SMGB0077 rev.0 - 01/2013
10
2
1