Accessories Supplied With The Air Panel: P-Ap160Na1 / P-Ap160Nae - Hitachi RCI-1.0FSN3 Service Manual

2 Unit installation
Sensing area for the motion sensor (only for air panel model P-AP160NAE)
The sensing area for the motion sensor is shown in the figure below when applying the motion sensor with the air panel.
N O T E
The motion sensor may detect as absence in the case that the indoor unit with the motion sensor is installed to a
high ceiling (higher than 4m) even if someone is in a room.

2.1.3 Accessories supplied with the air panel: P-AP160NA1 / P-AP160NAE

Check that the following accessories are supplied with the unit.
N O T E
Please contact your HITACHI distributor if any of the accessories has not been supplied with the unit.
Accessory
Long screw
(M6 Cross Screw)
Relay wire
A: 3 poles / B: 5 poles
Wiring cover
Cord band
19
SMGB0077 rev.0 - 01/2013
Motion sensor
Installation Height of Indoor Unit h (m)
Sensing Area for Motion Sensor Øa (m)
Motion Detection
P-AP160NA1
A B
Ø a
From floor surface
0.8m
2.7 3.2
Approx. 7.0 Approx. 8.8
Human Motion
P-AP160NAE
4 4
- 1
- 1
- 3
h
Purpose
For fixing air panel
For motion sensor
For protection of relay
connector
For clamping wiring cover
and relay connector
2