Removal Of The Float Switch - Hitachi RCI-1.0FSN3 Service Manual

10 Servicing

10.8.5 Removal of the float switch

Nº
1 Float switch position
N O T E
To disconnect and remove the float switch, previously see the
chapter corresponding to the wiring diagrams in this Manual.
Remove the necessary covers to access the float switch.
Loosen the screws securing the float switch to the support.
N O T E
The torque value of the resin nut is 0.3 - 0.4 Nm. If the torque
value is higher, the nut will be damaged.
Nº
1 Float switch
Loosen the resin nut securing the float switch and remove it.
362
SMGB0077 rev.0 - 01/2013
Part
Part