Removing Float Switch - Hitachi RCI-1.0FSN3 Service Manual

10 Servicing

10.1.9 Removing Float Switch

1 (1) Remove the drain pan according to the item "Removing
Drain Pan".
2 (2) Remove the insulation which attaches the wires for float
switch and drain-up mechanism together.
3 (3) Cut the plastic band fixing the wires at the fixing plate for
float switch.
4 (4) Removing
The float switch is attached next to the drain-up mechanism.
Remove the float switch by loosening the fixing screw for the
fixing base.
N O T E
When reassembling, wrap up the wires for float switch and
drain-up mechanism together by the insulation. Fix securely
them to the original position. When attaching the drain pan
again, pay attention not to pull the wires strongly. Otherwise,
the insulation attaching at the cabinet may be peeled.
N O T E
Pay attention to handle the float switch. If it is
dropped to a floor, the malfunction may occur.
When attaching the float switch, tighten the screw by hand.
(Do not use a motor-driven screwdriver.)
311
SMGB0077 rev.0 - 01/2013
Float Switch
Float Switch
Nut
Fixing Plate for
Float Switch
Screw for
Plastic Band
Fixing Plate
Lead Wires
10