File Actions - Cisco 220 Series Smart Plus Administration Manual

Administration: File Management

File Actions

File Actions
Cisco 220 Series Smart Plus Switches Administration Guide Release 1.0.0.x
• Mirror Configuration—A copy of the Startup Configuration, created by the
switch when the following conditions exist:
- The switch has been operating continuously for 24 hours.
- No configuration changes have been made to the Running Configuration
in the previous 24 hours.
- The Startup Configuration is identical to the Running configuration.
Only the system can copy the Startup Configuration to the Mirror
Configuration. However, you can copy from the Mirror Configuration to other
file types or to another device.
If the switch is rebooted, the Mirror Configuration is reset to the factory
default parameters. In all other aspects, the Mirror Configuration behaves
the same as a Backup Configuration, providing a copy of the parameter
values that is preserved if the switch is rebooted.
• Firmware—The program that controls the operations and functionality of
the switch. More commonly referred to as the image.
• Language File—The dictionary that enables the web-based interface to be
displayed in the selected language.
• Flash Logs —SYSLOG messages stored in Flash memory.
The following actions can be performed to manage firmware, configuration files,
and logs:
• Upgrade the firmware image, replace a second language file, or back up
the firmware as described in
section.
• View the firmware image currently in use or select the image to be used in
the next reboot as described in the
• Save configuration files on the switch to a location on another device as
described in the
• Clear the Startup Configuration or Backup Configuration file types as
described in the
Upgrade/Backup Firmware/Language
Active Image
Download/Backup Configuration or Logs
Configuration File Properties
section.
section.
section.
4
41