Table of Contents
Advertisement
Administration: File Management
Copy/Save Configuration Files
Copy/Save Configuration Files
!
CAUTION
STEP 1
STEP 2
STEP 3
Cisco 220 Series Smart Plus Switches Administration Guide Release 1.0.0.x
When you click Apply on any window, changes that you made to the switch
configuration settings are stored only in the Running Configuration. To preserve
the parameters in the Running Configuration, the Running Configuration must be
copied to another configuration type or saved as a file on another device.
Use the Copy/Save Configuration page to copy or save one configuration file to
another for backup purposes. The bottom of the page has a button, Disable Save
Icon Blinking. Click to toggle between disable and enable.
Unless the Running Configuration is copied to the Startup Configuration or another
configuration file, all changes made since the last time the file was copied are lost
when the switch is rebooted.
The following combinations of copying internal file types are allowed:
•
From the Running Configuration to the Running Configuration, Startup
Configuration or Backup Configuration.
•
From the Startup Configuration to the Running Configuration, Startup
Configuration, or Backup Configuration.
•
From the Backup Configuration to the Running Configuration, Startup
Configuration, or Backup Configuration.
•
From the Mirror Configuration to the Running Configuration, Startup
Configuration, or Backup Configuration.
To copy one type of configuration file to another type of configuration file:
Click Administration > File Management > Copy/Save Configuration.
Enter the following information:
•
Source File Name—Select the configuration file type to be copied.
•
Destination File Name—Select the configuration file type to be overwritten
by the source file.
Click Apply. The file is copied and the switch is updated.
4
50
Advertisement
Table of Contents
