Table of Contents
Advertisement
Status and Statistics
Viewing Ethernet Interface
STEP 3
STEP 4
STEP 5
Cisco 220 Series Smart Plus Switches Administration Guide Release 1.0.0.x
60 sec
-
—Statistics are refreshed every 60 seconds.
The Receive Statistics area displays the following fields about incoming packets:
•
Total Bytes (Octets)—Octets received, including bad packets and FCS
octets, but excluding framing bits.
•
Unicast Packets—Good Unicast packets received.
•
Multicast Packets—Good Multicast packets received.
•
Broadcast Packets—Good Broadcast packets received.
•
Packets with Errors—Packets with errors received.
The Transmit Statistics area displays the following fields about outgoing packets:
•
Total Bytes (Octets)—Octets transmitted, including bad packets and FCS
octets, but excluding framing bits.
•
Unicast Packets—Good Unicast packets transmitted.
•
Multicast Packets—Good Multicast packets transmitted.
•
Broadcast Packets—Good Broadcast packets transmitted.
Click Clear Interface Counters to clear the statistics counters for the selected
interface.
Click Refresh to manually refresh the statistics counters for the selected interface.
Click View All Interfaces Statistics to see the statistics counters for all interfaces
on a single page. The Interface Statistics Table displays the above counters for all
interfaces. From this page you can perform the following actions:
•
Select the refresh rate from the Refresh Rate drop-down menu.
•
Select an interface and click Clear Interface Counters to clear the statistics
counters for the selected interface.
•
Click Clear All Interface Counters to clear the statistics counters for all
interfaces.
•
Select an interface and click View Interface Statistics to see the statistics
counters for the selected interface on a single page.
•
Click Refresh to manually refresh the statistics counters for all interfaces.
2
19
Advertisement
Table of Contents
