Table of Contents
Advertisement
Administration: Discovery
Configuring LLDP
STEP 4
STEP 1
STEP 2
STEP 3
Cisco 220 Series Smart Plus Switches Administration Guide Release 1.0.0.x
a new endpoint device links to the switch. Refer the
Network Policy
section for more details.
Click Apply. The LLDP properties are defined, and the Running Configuration is
updated.
Configuring LLDP Port Settings
Use the Port Settings page to activate LLDP per port and enter the TLVs that are
sent in the LLDP PDU.
To define the LLDP port settings:
Click Administration > Discovery LLDP > Port Settings.
Select a port and click Edit.
Enter the following information:
•
Interface—Select the port to be defined.
•
Administrative Status—Select the LLDP publishing option for the port. The
values are:
-
Tx Only—Publishes only but does not discover.
-
Rx Only—Discovers but does not publish.
-
Tx & Rx—Publishes and discovers.
-
Disable—Disables LLDP on the port.
•
Available Optional TLVs—Select the information to be published by the
switch by moving the TLV to the Selected Optional TLVs list. The available
TLVs contain the following information:
-
Port Description—Information about the port, including manufacturer,
product name and hardware/software version.
-
System Name—System's assigned name (in alpha-numeric format). The
value equals the sysName object.
-
System Description—Description of the network entity (in alpha-
numeric format). This includes the system's name and versions of the
hardware, operating system, and networking software supported by the
switch. The value equals the sysDescr object.
Configuring LLDP MED
8
80
Advertisement
Table of Contents
