Table of Contents
Advertisement
Administration: Discovery
Configuring LLDP
STEP 3
STEP 1
STEP 2
STEP 3
Cisco 220 Series Smart Plus Switches Administration Guide Release 1.0.0.x
VLAN Type
-
possible field values are:
Tagged—Indicates the network policy is defined for tagged VLANs.
Untagged—Indicates the network policy is defined for untagged VLANs.
-
User Priority
DSCP
-
—Network policy DSCP.
Click LLDP Port Status Table to display the details of LLDP port status in a table.
Viewing LLDP Neighbors Information
The LLDP Neighbor page displays information that was received using the LLDP
protocol from neighboring devices. After timeout (based on the value received
from the neighbor Time To Live TLV during which no LLDP PDU was received from
a neighbor), the information is deleted.
To view the LLDP neighbors information:
Click Administration > Discovery LLDP > LLDP Neighbor.
Select a local port, and click Go.
The following LLDP neighbor information for the selected port is displayed:
•
Local Port—Number of the local port to which the neighbor is connected.
•
Chassis ID Subtype—Type of chassis ID (for example, MAC address).
•
Chassis ID—Identifier of the 802 LAN neighboring device's chassis.
•
Port ID Subtype—Type of the port identifier that is shown.
•
Port ID—Identifier of port.
•
System Name—Published name of the switch.
•
Time to Live—Time interval in seconds after which the information for this
neighbor is deleted.
Click Detail to display the details of LLDP port status in a table.
—VLAN type for which the network policy is defined. The
—Network policy user priority.
8
88
Advertisement
Table of Contents
