Table of Contents
Advertisement
Administration: File Management
Upgrade/Backup Firmware/Language
STEP 1
STEP 2
STEP 3
STEP 4
Cisco 220 Series Smart Plus Switches Administration Guide Release 1.0.0.x
Upgrading the Language File
Upgrading the Language File
If a new language file was loaded onto the switch, the new language can be
selected from the Language drop-down menu. (It is not necessary to reboot the
switch.)
To upload a new language file:
Click Administration > File Management > Upgrade/Backup Firmware/
Language.
To upload a language file from a TFTP server to the switch, enter the following
information:
•
Transfer Method—Select via TFTP as the transfer method.
•
Save Action—Select Upgrade as the action.
•
File Type—Select Language File as the file type.
•
TFTP Server Definition—Select whether to specify the TFTP server by IP
address or domain name.
•
IP Version—Select either Version 4 or Version 6 if the TFTP server is
identified by IP address.
•
TFTP Server IP Address/Name—Enter the IP address or domain name of
the TFTP server.
•
Source File Name—Enter the name of the source language file located on
the TFTP server.
Click Apply.
To upload a language file from another device such as your local PC to the switch,
do the following:
•
Transfer Method—Select via HTTP/HTTPS as the transfer method.
•
Save Action—Select Upgrade as the action.
•
File Type—Select Language File as the file type.
•
File Name—Click Browse to select a new language file located on another
device such as your local PC.
4
45
Advertisement
Table of Contents
