Administration: File Management
Upgrade/Backup Firmware/Language
STEP 5
STEP 6
STEP 7
Cisco 220 Series Smart Plus Switches Administration Guide Release 1.0.0.x
•
Transfer Method—Select via HTTP/HTTPS as the transfer method.
•
Save Action—Select Upgrade as the action.
•
File Type—Select Firmware Image as the file type.
•
File Name—Click Browse to select a firmware image located on another
device such as your local PC.
Click Apply.
To save a copy of the active image on the switch to a TFTP server, enter the
following information:
•
Transfer Method—Select via TFTP as the transfer method.
•
Save Action—Select Backup as the action.
•
File Type—Select Firmware Image as the file type.
•
TFTP Server Definition—Select whether to specify the TFTP server by IP
address or domain name.
•
IP Version—Select either Version 4 or Version 6 if the TFTP server is
identified by IP address.
•
TFTP Server IP Address/Name—Enter the IP address or domain name of
the TFTP server.
•
Destination File Name—Enter the name of the firmware image that will be
saved to the TFTP server.
Click Apply.
4
44