Table of Contents
Advertisement
Quality of Service
Configuring QoS Advanced Mode
STEP 4
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
Cisco 220 Series Smart Plus Switches Administration Guide Release 1.0.0.x
•
Exceed Action—Select the action to be performed on incoming packets
that exceed the CIR. Possible values are:
-
Forward—Packets exceeding the defined CIR value are forwarded.
-
Drop—Packets exceeding the defined CIR value are dropped.
Click Apply. The Running Configuration is updated.
Configuring QoS Policies
Use the Policy Table page to define advanced QoS polices. Only those policies
that are bound to an interface are active (see the
section).
Each policy consists of:
•
One or more class maps of ACLs which define the traffic flows in the policy.
•
One or more aggregates that applies the QoS to the traffic flows in the
policy.
After a policy has been added, class maps can be added on the Policy Class
Maps page.
To create an advanced QoS policy:
Click Quality of Service > QoS Advanced Mode > Policy Table.
Click Add.
Enter the name of the new policy in the New Policy Name field.
Click Apply. The QoS policy profile is added, and the Running Configuration is
updated.
Click Policy Class Map Table to display the Policy Class Maps page.
Configuring Policy Binding
18
261
Advertisement
Table of Contents
