Table of Contents
Advertisement
Configuring Security
Configuring Management Access Methods
Cisco 220 Series Smart Plus Switches Administration Guide Release 1.0.0.x
HTTP
-
—Assigns HTTP access to the rule. Users requesting access to the
switch who meet the HTTP access profile criteria, are permitted or
denied.
Secure HTTP (HTTPS)
-
meet the HTTPS access profile criteria, are permitted or denied.
SNMP
-
—Users requesting access to the switch who meet the SNMP
access profile criteria are permitted or denied.
•
Action—Select the action attached to the rule. The options are:
-
Permit—Permits access to the switch if the user matches the settings in
the profile.
-
Deny—Denies access to the switch if the user matches the settings in the
profile.
•
Applies to Interface—Select the interface attached to the rule. The options
are:
-
All—Applies to all ports, VLANs, and LAGs.
-
User Defined—Applies to the selected interface. You need to select a
port or a LAG from the Interface drop-down menu.
•
Interface—Select the type of interface and specific interface if
Defined
was selected.
•
Applies to Source IP Address—Select the type of source IP address to
which the access profile applies. The options are:
-
All—Applies to all types of IP addresses.
-
User Defined—Applies to only those types of IP addresses defined in
the fields.
•
IP Version—Select either Version 4 or Version 6 to define the source IP
address.
•
IP Address—Enter the source IP address.
•
Mask—Select the format for the subnet mask for the source IP address, and
enter a value in one of the fields:
Network Mask
-
belongs and enter the subnet mask in dotted decimal format.
Prefix Length
-
—Select the Prefix Length and enter the number of bits that
comprise the source IP address prefix.
—Users requesting access to the switch who
—Select the subnet to which the source IP address
16
User
189
Advertisement
Table of Contents
