Supported Mibs - Cisco 220 Series Smart Plus Administration Manual

SNMP

Supported MIBs

STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
Supported MIBs
Cisco 220 Series Smart Plus Switches Administration Guide Release 1.0.0.x
If you decide to use SNMP v3:
Define the SNMP engine on the SNMP > Engine ID page, as described in the
Configuring SNMP Engine
engine ID.
Optionally, define SNMP view(s) on the SNMP > Views page, as described in the
Configuring SNMP Views
SNMP community or an SNMP group.
Define SNMP group(s) on the SNMP > Groups page, as described in the
Configuring SNMP Groups
specified SNMP view.
Define SNMP users on the SNMP > Users page, as described in the
SNMP Users section. The SNMP users can be associated with an SNMP group.
Define the notification recipient(s) on the SNMP > Notification Recipients SNMPv3
page, as described in the
The following standard MIBs are supported by the Cisco 220 switch:
• RFC1213 MIB-II
• RFC1215 Generic-Traps MIB
• RFC1493 (4188) Bridge MIB
• RFC2618 RADIUS Client MIB
• RFC2674 Bridge MIB Extension
• RFC2737 Entity MIB
• RFC2819 RMON
• RFC2863 The Interface Group MIB
• RFC3164 Syslog MIB
• RFC3621 PoE MIB (only available for PoE models)
• RFC3635 Ethernet-Like MIB
ID. Either create a unique engine ID or use the default
section. This limits the range of OIDs available to an
section. The group can be associated with the
Configuring SNMPv3 Notification Recipients
19
Managing
section.
267