Ip Vrrp Preempt - Dell Force10 S2410-01-10GE-24P Command Reference Manual

[no] ip vrrp vrID mode
Syntax
The parameter vrID is the virtual router ID, which has an integer value ranging from 1 to 255.
The
interface. Disabling the status field stops a virtual router.
Default disabled
Mode
Interface Config; Interface VLAN; Interface Range, which is indicated by the
(conf-if-range-interface)# prompt, such as (conf-if-range-vlan 10-20)#.
Command
Version 2.3
History
Related interface range
Commands
interface vlan
ip vrrp <vrID>

ip vrrp preempt

This command sets the preemption mode value for the virtual router configured on a specified
interface.
[no] ip vrrp vrID preempt
Syntax
The parameter vrID is the virtual router ID which has an integer value range from 1 to 255.
The
configured on a specified interface.
Default enabled
Mode
Interface Config; Interface VLAN; Interface Range, which is indicated by the
(conf-if-range-interface)# prompt, such as (conf-if-range-vlan 10-20)#.
Command
Version 2.3
History
Related interface range
Commands
interface vlan
ip vrrp <vrID>
no
version of this command disables the virtual router configured on the specified
Added Interface Range and Interface VLAN modes.
Defines an interface range and accesses the Interface Range mode
Creates a VLAN and assigns it an ID, and then enters the Interface VLAN mode, which
provides access to VLAN configuration commands for the specified VLAN.
Sets the VRID (virtual router ID) on an interface for virtual router configuration in the
router. This command also has options.
no
version of this command sets the default preemption mode value for the virtual router
Added Interface Range and Interface VLAN modes.
Defines an interface range and accesses the Interface Range mode
Creates a VLAN and assigns it an ID, and then enters the Interface VLAN mode, which
provides access to VLAN configuration commands for the specified VLAN.
Sets the VRID (virtual router ID) on an interface for virtual router configuration in the
router. This command also has options.
Routing Commands | 417