Network Protocol - Dell Force10 S2410-01-10GE-24P Command Reference Manual

Related
interface managementethernet
Commands
ip address (management)
show interface
network mac-address
This command is replaced by the
Mode
Privileged Exec
Command
Version 2.3
History
network mac-type
This command is replaced by the
Mode
Privileged Exec
Command
Version 2.3
History
network parms
Command
Version 2.3
History

network protocol

Command
Version 2.3
History
protocol
This command specifies the network configuration protocol to be used for the management VLAN.
protocol {bootp | dhcp | none}
Syntax
Invokes the (Config-if-ma)# prompt, where you can set up a
management IP interface (the ip address command; see next).
Configures the IP address of the management interface.
Displays a summary of statistics for a specific port, including the
management port, or a count of all CPU traffic based upon the
argument.
mac-address
Introduced. Replaced by the
mac-type
Introduced. Replaced by the
Deprecated: Replaced, in part, by
management address. Replaced, in part, by
(management).
protocol
Replaced by the
command in Version 2.3.
mac-address command.
command in Version 2.3.
mac-type command.
management route default
interface managementethernet
command.
System Management Commands | 41
for the gateway part of the
and ip address