Related
Commands
spanning-tree (LAG)
Syntax
Default
Mode
Command
History
Related
Commands
spanning-tree 0 cost (LAG)
Syntax
Defaults
Mode
Command
History
Related
Commands
|
LAG/Port Channel Commands
306
interface range
Defines an interface range and accesses the Interface Range mode
interface port-channel
Defines a port channel and invokes the Interface Port Channel Config mode
snmp trap link-status
Enables link status traps by selected interface
(interface)
This command sets the spanning-tree operational mode on the selected LAG (port channel).
The no version of this command sets the spanning-tree operational mode to disabled. While disabled,
the spanning-tree configuration is retained and can be changed, but is not activated.
[no] spanning-tree
disabled
Interface Port Channel Config
Version 2.5.1
Introduced in the new Interface Port Channel Config mode
interface range
Defines an interface range and accesses the Interface Range mode
interface port-channel
Defines a port channel and invokes the Interface Port Channel Config mode
snmp trap link-status
Enables link status traps by selected interface
(interface)
spanning-tree
Sets the spanning-tree operational mode to enabled at the global level.
This command sets/clears the CST cost for the port channel.
[no] spanning-tree 0 cost
auto-calculated cost
Interface Port Channel Config
Version 2.5.1
Introduced in the new Interface Port Channel Config mode
spanning-tree (LAG)
Sets the spanning-tree operational mode on the selected port channel
interface port-channel
Defines a port channel and invokes the Interface Port Channel Config mode
1-65535