Show Bootvar - Dell Force10 S2410-01-10GE-24P Command Reference Manual

Command
Version 2.5.1
History
Related
update bootcode
Commands

show bootvar

show bootvar
This command displays version information and activation status for the current active and backup
images on the specified stack member. If you do not specify a unit number, the command displays
image details for all nodes on the Stack. The command also displays any text description associated
with an image. When this command is used on a standalone system, it displays the switch activation
status, and the unit parameter is not valid.
show bootvar [ unit ]
Syntax
Mode Privileged Exec
Command
Version 2.5.1
History
Example Figure 6-39. Example of Output from the show bootvar Command
Force10 #show bootvar
Image Descriptions
--------------------------------------------------------------------
--------------------------------------------------------------------
image1 — The SFTOS image stored in the "image1" location in NVRAM
Report Fields
image2 — The SFTOS image stored in the "image2" location in NVRAM
unit — The stack member number
current-active — The SFTOS image currently running the switch
next-active — The SFTOS image set to be invoked on the next reload
Related
boot system
Commands
update bootcode
Introduced
Activate the specified software image for subsequent reboots.
Display version information and activation status for the current active and backup
images.
Introduced
image1 : default image
image2 :
Images currently available on Flash
unit image1
1 2.5.1 <none>
Activate the specified software image for subsequent reboots.
Activate the specified software image for subsequent reboots.
image2 current-active
image1
next-active
image1
System Configuration Commands | 121