Interface Managementethernet; Ip Address (Management) - Dell Force10 S2410-01-10GE-24P Command Reference Manual

Mode
Command
History

interface managementethernet

Syntax
Mode
Command
History
Usage
Information
Related
Commands

ip address (management)

Syntax
| System Management Commands
38
Global Config
Version 2.3 Modified: Moved from Privileged Exec mode to Global Config mode.
Version 2.2
Replaced
This command invokes the Interface ManagementEthernet mode (uses the
prompt), where you can set up a management IP interface. For details on management interfaces, see
the Management chapter of the SFTOS Configuration Guide.
interface managementethernet
Global Config
Version 2.3 Introduced
This command provides access to the following network configuration command groups:
Table 5-3. Interface ManagementEthernet Mode Command Families
ip Configure network parameters of the switch.
mac-address Configure MAC Address.
mac-type Select the locally administered or burnedin MAC address.
vlan Configure the Management VLAN ID of the switch.
protocol Select DHCP, BootP, or None as the network config protocol
ip address (management)
mac-address
mac-type
management route default
protocol
show interface
vlan participation (management
VLAN only)
This command configures the IP address of the management interface.
ip addressripaddr subnetmask
set prompt
command.
Configures the IP address of the management interface.
Configure the MAC address of the management interface.
Configure the MAC type of the management interface.
Set the IP gateway of the switch
Set the network protocol of the management interface.
Display a summary of statistics for a specific port, including the
management port, or a count of all CPU traffic based upon the
argument.
Set the VLAN ID of the management interface.
(Config-if-ma)#