Configuration Scripting - Dell Force10 S2410-01-10GE-24P Command Reference Manual

update bootcode
Syntax
Parameters
Default
Mode
Command
History
Related
Commands

Configuration Scripting

| System Configuration Commands
122
This command updates the bootcode (boot loader) on the switch. The bootcode is read from the active
image for subsequent reboots.
update bootcode [
unit ]
unit (OPTIONAL) This parameter is valid only on stacks. An error is returned if a number is entered on a
standalone system. In a stack, the parameter identifies the stack member on which this command
must be executed. Default: all units in the stack
all units in the stack
Privileged Exec
Version 2.5.1 Introduced
boot system
delete (software image)
show bootvar
Configuration scripting enables you to generate text-formatted script files representing the current
configuration. These configuration script files can be uploaded to a PC and edited, downloaded to the
system and applied to the system. Configuration scripts can be applied to one or more switches with
no/minor modifications.
Note:
The file extension must be ".scr".
A maximum of ten scripts are allowed on the switch.
The combined size of all script files on the switch cannot exceed 500 KB.
Configuration script files are not distributed across the stack, and only live in the unit that is
the master unit at the time of the file download.
The commands in this section are:
• script apply on page 123
• script delete on page 123
• script list on page 123
• script show on page 124
• script validate on page 124
Activate the specified software image for subsequent reboots.
Delete the designated image file from permanent storage on the switch.
Display version information and activation status for the current active and
backup images.