Flow Of Cli Operation - Dell Force10 S2410-01-10GE-24P Command Reference Manual

Class Map Mode:
class match commands specify Layer 2, Layer 3 and general match criteria. Use the class-map
class-map-name commands to access the QoS class map configuration mode to configure QoS class
maps. The prompt sequence is:
Router OSPF Config Mode:
commands. The prompt sequence is:
Router RIP Config Mode:
commands. The prompt sequence is:
MAC Access List Config Mode.
access-List and to enter the mode containing mac access-list configuration commands. The prompt
sequence is:
TACACS Config Mode.
TACACS
Stack Config Mode.
switches.
VLAN Mode.
mode) This mode groups all the commands pertaining to VLANs.
Command Prompt: hostname (conf-if-vl -vlan-id )#

Flow of CLI Operation

1. You log into the CLI session and enter the User Exec mode. In the User Exec mode, the " host-
hostname
This mode consists of class creation/deletion and matching commands. The
hostname
hostname
hostname
hostname
hostname
hostname
hostname
hostname
+ user authentication server.
Use the nC OR command to access the Stack Config mode for stacking S50
(formally called the Interface Vlan Config mode, or more simply, the Interface Vlan
Note:
Before Release 2.3, the VLAN mode was accessed from the Privileged Exec mode.
With Release 2.3, the mode is accessed from the Global Config mode by entering the
command interface vlan vlanid .
name >" prompt is displayed on the screen.
The parsing process is initiated whenever you type a command and press
ENTER. The command tree is searched for the command of interest. If the com-
mand is not found, the output message indicates where the offending entry begins.
For instance, the Privileged Exec mode has the command
attempt to execute the command, but you enter an extra "p" in "arpp", then the
(Config-policy-classmap)#
(Config)# class-map <class-map-name>
(Config class-map)#
In this mode, you can access the router OSPF configuration
(Config)# router ospf
(Config router)#
In this mode, you can access the router RIP configuration
(Config)# router rip
(Config router)#
Use the MAC Access-List Config mode to create a MAC
(Config)#mac-access-list extended name
(Config-mac-access-list)#
Use this mode to configure the connection parameters to a
show arp brief
. If you
Using the Command Line Interface | 33