Buffer Dedicated Interface (10G Ports) - Dell Force10 S2410-01-10GE-24P Command Reference Manual

Defaults Equal allocation per queue
Mode
Global Config
Command
Version 2.5.1
History
Usage For example, to set the buffer to 50k in each buffer on port 1/0/1 in unit 1 in an S50 stack, the
command would be buffer dedicated interface 1/0/1 50 50 50 50 50 50 50.
Information
Related
buffer check
Commands
buffer dedicated interface
(10G ports)
buffer dynamic (1G and
stack ports)
show buffer unit
show buffer allocation
interface

buffer dedicated interface (10G ports)

This command sets buffer sizes per port and per queue for ASICs controlling the optional 10Gb ports
49 and 50 on the S50 and the 10Gb ports on the S25P.
Syntax [no] buffer dedicated interface unit/slot/port Queue-0_buffer Queue-1_buffer Queue-2_buffer
Queue-3_buffer Queue-4_buffer Queue-5_buffer Queue-6_buffer
Use the no buffer dedicated interface unit/slot/port command syntax to return buffers to their
default values.
Introduced
Verify that the configured buffer allocations meet the hardware requirements.
Set buffer sizes per port and per queue for ASICs controlling the optional 10GB
ports 49 and 50 on the S50 and the 10Gb ports on the S25P.
Set dynamic buffer sizes per port for ports 1 – 48 and the stack port on the S50,
and ports 1 – 52 and the stack port on the S50V.
Display configured values for dedicated buffers, dynamic buffers, and packet
each
limits for port in an S50, S50V, or S25P, as well as the actual settings from
the switch hardware.
Display configured and actual static buffer allocation and packet allocation
values per queue for the
selected
port in an S50, S50V, or S25P.
Quality of Service (QoS) Commands | 369