Ip Dhcp Bootp Automatic; Ip Dhcp Conflict Logging; Ip Dhcp Excluded-Address - Dell Force10 S2410-01-10GE-24P Command Reference Manual

host
This command specifies the IP address and network mask for a manual binding to a DHCP client.
Address and Mask are valid IP addresses; each made up of four decimal bytes ranging from 0 to 255.
IP address 0.0.0.0 is invalid.
The prefix-length is an integer from 0 to 32.
The no version of this command removes the IP address of the DHCP client.
host address [mask | prefix-length ]
Syntax
no host
Default
none
Mode
DHCP Pool Config

ip dhcp bootp automatic

This command enables the allocation of the addresses to the bootp client. The addresses are from the
automatic address pool.
The no version of this command disables the allocation of the addresses to the bootp client. The
address are from the automatic address pool.
ip dhcp bootp automatic
Syntax
Default
disable
Mode Global Config

ip dhcp conflict logging

This command enables conflict logging on the DHCP server.
The no version of this command disables conflict logging on the DHCP server.
ip dhcp conflict logging
Syntax
Default
enabled
Mode Global Config

ip dhcp excluded-address

This command specifies the IP addresses that a DHCP server should not assign to DHCP clients.
Low-address and high-address are valid IP addresses; each made up of four decimal bytes ranging
from 0 to 255. IP address 0.0.0.0 is invalid.
DHCP Server Commands | 235