show igmpsnooping fast-leave
Command
Version 2.3
History
show igmpsnooping mrouter interface
This command displays information about statically configured ports.
show igmpsnooping mrouter interface {unit/slot/port | vlan 1-3965 }
Syntax
Parameters
unit/slot/port
vlan 1-3965
Mode
Privileged Exec
Example
Figure 17-105. Output of the show igmpsnooping Command
Force10#show igmpsnooping mrouter interface 1/0/1
Slot/Port...................................... 1/0/1
Multicast Router Attached...................... Disable
Slot/Port—The port on which multicast router information is being displayed
Report Fields
Multicast Router Attached—Whether or not multicast router is statically enabled on the interface
VLAN ID—(only for the
show mac-address-table igmpsnooping
This command displays the IGMP Snooping entries in the Multicast Forwarding Database (MFDB)
table.
show mac-address-table igmpsnooping
Syntax
Mode
Privileged Exec
Deprecated: Use
show igmpsnooping
on the designated interface.
Display ports on which Multicast Routers are detected. Enter interface in
unit/slot/port format.
Display VLANS for the specified interface on which Multicast Routers are
detected. Routing must be enabled on the VLAN in order for the VLAN to
be reported by this command.
vlan 1-3965
option) The list of VLANs in which the interface is a member
to display whether or not IGMP Snooping is enabled
IGMP Snooping Commands | 285