inlinepower priority
Syntax
Parameters
Defaults
Mode
Command
History
Related
Commands
inlinepower limit
Syntax
Parameters
Defaults
Mode
Command
History
Related
Commands
inlinepower type
Syntax
|
System Configuration Commands
116
Configure the priority of a port in terms of access to power.
inlinepower priority {critical | high | low}
critical | high | low
By default, the power priority of a port is set to low.
Interface Config; Interface Range Ethernet
Version 2.5.1
Introduced
show inlinepower (stack)
show inlinepower
Configure the power limit of a port (the number of watts available to it if PoE is enabled and other
ports do not have higher priority access to the power budget).
inlinepower limit
1-18
1-18
18 (18 watts)
Interface Config; Interface Range Ethernet
Version 2.5.1
Introduced
show inlinepower (stack)
show inlinepower
Enter a power profile description of the port.
inlinepower type
type-string
critical
Enter
to enable the selected port to receive power at the highest
priority.
high
Enter
to enable the selected port to receive power at the next highest
priority.
low
Enter
to set the power priority of the selected port at the lowest level.
Display PoE status of stack members.
Display PoE status of designated port.
Enter an integer from 1 to 18, representing the maximum number of watts to
make available to the selected port.
Display PoE status of stack members.
Display PoE status of designated port.