Mode
Command
History
Example
SNTP Commands
sntp broadcast client poll-interval
Syntax
Default
Mode
|
Time Commands
244
Privileged Exec
Version 2.5.1.0
Introduced
Figure 14-85. Example of Output from show clock Command
Force10# show clock
FRI MAR 02 08:57:47 2006
This section provides a detailed explanation of the Simple Network Time Protocol (SNTP) commands.
The commands are comprised of two functional groups:
•
Configuration Commands configure features and options of the switch.
•
Show commands display settings, statistics, and other information. For every configuration
command there is a show command that displays the configuration setting.
This section describes the following commands:
•
sntp broadcast client poll-interval
•
sntp client mode
•
sntp client port
•
sntp unicast client poll-interval
•
sntp unicast client poll-timeout
•
sntp unicast client poll-retry
•
sntp server
•
show sntp
•
show sntp client
•
show sntp server
This command sets the poll interval for SNTP broadcast clients in seconds as a power of two where
poll-interval
can be a value from 6 to 16.
sntp broadcast client poll-interval
Use the no sntp broadcast client poll-interval version of this command to reset the poll interval
for SNTP broadcast client back to its default value.
6
Global Config
poll-interval