Tftp Inspection; Xdmcp Inspection - Cisco 7604 Configuration Manual

Catalyst 6500 series switch and cisco 7600 series router firewall services module configuration guide using the cli

Hide thumbs Also See for 7604:

Table of Contents

TFTP Inspection

TFTP inspection is enabled by default.

For information about TFTP inspection, see the inspect tftp command page in the Catalyst 6500 Series

Switch and Cisco 7600 Series Router Firewall Services Module Command Reference.

XDMCP inspection is enabled by default; however, the XDMCP inspection engine is dependent upon

proper configuration of the established command.

For information about XDMCP inspection, see the established and inspect pptp and command pages

in the Catalyst 6500 Series Switch and Cisco 7600 Series Router Firewall Services Module Command

Catalyst 6500 Series Switch and Cisco 7600 Series Router Firewall Services Module Configuration Guide using ASDM

Applying Application Layer Protocol Inspection

Show Quick Links

Table of Contents