Cisco 7604 Configuration Manual page 430

Catalyst 6500 series switch and cisco 7600 series router firewall services module configuration guide using the cli
Hide thumbs Also See for 7604:
Table of Contents

Advertisement

Chapter 22
Applying Application Layer Protocol Inspection
CTIQBE Inspection
Figure 22-2
Single Transparent Firewall for Cisco IP SoftPhone (Virtual Conference)
Single transparent with CTIQBE inspection
(with collaboration settings set to Virtual Conference Room)
Inside
Outside
Firewall
Service Module
(FWSM)
vlan100
vlan50
PC
PC
10.0.0.23/8
10.0.0.21/8
M
10.0.0.101/8
CallManager 3.3
See the following configuration for this example:
firewall transparent
!
interface Vlan50
nameif inside
bridge-group 1
security-level 100
!
interface Vlan100
nameif outside
bridge-group 1
security-level 0
!
interface BVI1
ip address 10.0.0.30 255.0.0.0
!
access-list voice extended permit tcp any any eq ctiqbe
access-list voice extended permit tcp any any eq 1503
!
access-group voice in interface inside
access-group voice in interface outside
!
policy-map global_policy
class inspection_default
inspect ctiqbe
!
TCP port 1503 must be allowed to pass through the security appliance for virtual conference room
Note
collaboration to work with Cisco IP SoftPhone through the security appliance.
The following figure shows a sample configuration for a single transparent firewall for Cisco IP
SoftPhone with NetMeeting enabled
(Figure
22-3). Cisco IP SoftPhone is configured with the
collaboration setting of NetMeeting.
Catalyst 6500 Series Switch and Cisco 7600 Series Router Firewall Services Module Configuration Guide using ASDM
22-14
OL-20748-01

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

7609-s76137606-sCatalyst 6500 series7600 series

Table of Contents